Blane Drivers Is It Time To Replace Your PCV Valve

Your browser does not support video

Improved fuel economy has two benefits: less fuel is necessary and fewer emissions are released. Blane cars and trucks run cleaner than ever. Blane motorists may not realize that the first federally mandated pollution control device came out almost fifty years ago.

MN drivers that were around in the early 60′s may remember that the PCV valve came out on 1964 model cars. PCV stand for Positive Crankcase Ventilation. Blane Drivers: Is It Time To Replace Your PCV Valve?The crankcase is the lower part of the engine where the crankshaft is housed and where the engine oil lives. The crankshaft is connected to the pistons that power the engine.

When fuel is burned in the sedan engine, it pushes the pistons down and the crankshaft rotates and sends power to the transmission. Some of the explosive gases from combustion squeeze past the pistons and down into the crankcase.

Now this gas is about 70% unburned fuel. If it were allowed to remain in the crankcase, it would contaminate the oil and quickly turn it to sludge. Sludge is like Vaseline and clogs passages in the engine leading to damage.

Also, the pressure build up would blow out seals and gaskets. So in the old days, there was just a hose that vented the crankcase out into the air. Obviously, not good for our air quality in Minneapolis.

Enter the PCV valve. It’s a small, one-way valve that lets out the gases from the crankcase, and routes them back into the air intake system where they are re-burned in the engine.
Fresh air comes into the crankcase through a breather tube. This makes for good circulation in the crankcase. And that gets the bad air out. As you can imagine, however, the valve gets gummed up over time.

Blane drivers that skip oil changes now and then will notice that the PCV valve gets gummed up even faster. If the PCV valve is sticking in your sedan, the gases won’t circulate as well, leading to increased pressure in the crankcase. That, in turn, can lead to oil leaks. Fortunately, the PCV valve is very inexpensive to replace at Wagamon Brothers in Minneapolis. Some can even be checked by your understanding Wagamon Brothers advisor.

Your sedan vehicle manufacturers usually recommend they be changed somewhere between twenty and fifty thousand miles. Unfortunately, PCV valve replacement is left out of some sedan owner’s manuals, but at Wagamon Brothers, we will make sure your PVC is replaced if needed.

All of us Blane car owners can do our part for the environment. Watch that lead foot, stay on top of our automotive maintenance and don’t forget to replace our PCV valve.

Share

Wagamon Brothers

3719 3rd Street NE

Columbia Heights, MN 55421

763-789-7227

Once again Wagamon Brothers delivered a great engine program for Kyle Peterlin and Peterlin Racin...

Larry Peterlin
Date: Dec 28, 2010
  • Family Owned and Operated since 1957
  • 17 service bays
  • Our shop is equipped with the most modern and sophisticated computerized equipment available.